12 files changed, 487 insertions, 123 deletions
diff --git a/docs/installation/alpine_linux_en.md b/docs/installation/alpine_linux_en.md
index c726d559f..d89c7f46f 100644
--- a/docs/installation/alpine_linux_en.md
+++ b/docs/installation/alpine_linux_en.md
@@ -14,11 +14,15 @@ It assumes that you have administrative rights, either as root or a user with [s
 * `erlang-xmerl`
 * `git`
 * Development Tools
+* `cmake`
 
 #### Optional packages used in this guide
 
 * `nginx` (preferred, example configs for other reverse proxies can be found in the repo)
 * `certbot` (or any other ACME client for Let’s Encrypt certificates)
+* `ImageMagick`
+* `ffmpeg`
+* `exiftool`
 
 ### Prepare the system
 
@@ -28,7 +32,6 @@ It assumes that you have administrative rights, either as root or a user with [s
 awk 'NR==2' /etc/apk/repositories | sed 's/main/community/' | tee -a /etc/apk/repositories
 ```
 
-
 * Then update the system, if not already done:
 
 ```shell
@@ -39,7 +42,7 @@ sudo apk upgrade
 * Install some tools, which are needed later:
 
 ```shell
-sudo apk add git build-base
+sudo apk add git build-base cmake
 ```
 
 ### Install Elixir and Erlang
@@ -55,6 +58,7 @@ sudo apk add erlang erlang-runtime-tools erlang-xmerl elixir
 ```shell
 sudo apk add erlang-eldap
 ```
+
 ### Install PostgreSQL
 
 * Install Postgresql server:
@@ -75,6 +79,12 @@ sudo /etc/init.d/postgresql start
 sudo rc-update add postgresql
 ```
 
+### Install media / graphics packages (optional, see [`docs/installation/optional/media_graphics_packages.md`](docs/installation/optional/media_graphics_packages.md))
+
+```shell
+sudo apk add ffmpeg imagemagick exiftool
+```
+
 ### Install PleromaBE
 
 * Add a new system user for the Pleroma service:
diff --git a/docs/installation/arch_linux_en.md b/docs/installation/arch_linux_en.md
index bf9cfb488..724b4660a 100644
--- a/docs/installation/arch_linux_en.md
+++ b/docs/installation/arch_linux_en.md
@@ -9,11 +9,15 @@ This guide will assume that you have administrative rights, either as root or a
 * `elixir`
 * `git`
 * `base-devel`
+* `cmake`
 
 #### Optional packages used in this guide
 
 * `nginx` (preferred, example configs for other reverse proxies can be found in the repo)
 * `certbot` (or any other ACME client for Let’s Encrypt certificates)
+* `ImageMagick`
+* `ffmpeg`
+* `exiftool`
 
 ### Prepare the system
 
@@ -26,7 +30,7 @@ sudo pacman -Syu
 * Install some of the above mentioned programs:
 
 ```shell
-sudo pacman -S git base-devel elixir
+sudo pacman -S git base-devel elixir cmake
 ```
 
 ### Install PostgreSQL
@@ -51,6 +55,12 @@ sudo -iu postgres initdb -D /var/lib/postgres/data
 sudo systemctl enable --now postgresql.service
 ```
 
+### Install media / graphics packages (optional, see [`docs/installation/optional/media_graphics_packages.md`](docs/installation/optional/media_graphics_packages.md))
+
+```shell
+sudo pacman -S ffmpeg imagemagick perl-image-exiftool
+```
+
 ### Install PleromaBE
 
 * Add a new system user for the Pleroma service:
diff --git a/docs/installation/debian_based_en.md b/docs/installation/debian_based_en.md
index 8ae5044b5..eac499a29 100644
--- a/docs/installation/debian_based_en.md
+++ b/docs/installation/debian_based_en.md
@@ -12,11 +12,15 @@ This guide will assume you are on Debian Stretch. This guide should also work wi
 * `erlang-nox`
 * `git`
 * `build-essential`
+* `cmake`
 
 #### Optional packages used in this guide
 
 * `nginx` (preferred, example configs for other reverse proxies can be found in the repo)
 * `certbot` (or any other ACME client for Let’s Encrypt certificates)
+* `ImageMagick`
+* `ffmpeg`
+* `exiftool`
 
 ### Prepare the system
 
@@ -30,7 +34,7 @@ sudo apt full-upgrade
 * Install some of the above mentioned programs:
 
 ```shell
-sudo apt install git build-essential postgresql postgresql-contrib
+sudo apt install git build-essential postgresql postgresql-contrib cmake
 ```
 
 ### Install Elixir and Erlang
@@ -49,6 +53,12 @@ sudo apt update
 sudo apt install elixir erlang-dev erlang-nox
 ```
 
+### Optional packages: [`docs/installation/optional/media_graphics_packages.md`](docs/installation/optional/media_graphics_packages.md)
+
+```shell
+sudo apt install imagemagick ffmpeg libimage-exiftool-perl
+```
+
 ### Install PleromaBE
 
 * Add a new system user for the Pleroma service:
diff --git a/docs/installation/debian_based_jp.md b/docs/installation/debian_based_jp.md
index 42e91cda7..764afbe1a 100644
--- a/docs/installation/debian_based_jp.md
+++ b/docs/installation/debian_based_jp.md
@@ -16,11 +16,15 @@
 - `erlang-nox`
 - `git`
 - `build-essential`
+- `cmake`
 
 #### このガイドで利用している追加パッケージ
 
 - `nginx` (おすすめです。他のリバースプロキシを使う場合は、参考となる設定をこのリポジトリから探してください)
 - `certbot` (または何らかのLet's Encrypt向けACMEクライアント)
+- `ImageMagick`
+- `ffmpeg`
+- `exiftool`
 
 ### システムを準備する
 
@@ -32,10 +36,9 @@ sudo apt full-upgrade
 
 * 上記に挙げたパッケージをインストールしておきます。
 ```
-sudo apt install git build-essential postgresql postgresql-contrib
+sudo apt install git build-essential postgresql postgresql-contrib cmake ffmpeg imagemagick
 ```
 
-
 ### ElixirとErlangをインストールします
 
 * Erlangのリポジトリをダウンロードおよびインストールします。
@@ -50,6 +53,12 @@ sudo apt update
 sudo apt install elixir erlang-dev erlang-nox
 ```
 
+### オプションパッケージ: [`docs/installation/optional/media_graphics_packages.md`](docs/installation/optional/media_graphics_packages.md)
+
+```shell
+sudo apt install imagemagick ffmpeg libimage-exiftool-perl
+```
+
 ### Pleroma BE (バックエンド) をインストールします
 
 *  Pleroma用に新しいユーザーを作ります。
diff --git a/docs/installation/freebsd_en.md b/docs/installation/freebsd_en.md
new file mode 100644
index 000000000..fdcb06c53
--- /dev/null
+++ b/docs/installation/freebsd_en.md
@@ -0,0 +1,216 @@
+# Installing on FreeBSD 
+
+This document was written for FreeBSD 12.1, but should be work on future releases.
+
+## Required software 
+
+This assumes the target system has `pkg(8)`.
+
+```
+# pkg install elixir postgresql12-server postgresql12-client postgresql12-contrib git-lite sudo nginx gmake acme.sh cmake
+```
+
+Copy the rc.d scripts to the right directory:
+
+Setup the required services to automatically start at boot, using `sysrc(8)`.
+
+```
+# sysrc nginx_enable=YES
+# sysrc postgresql_enable=YES
+```
+
+## Initialize postgres
+
+```
+# service postgresql initdb
+# service postgresql start
+```
+
+### Install media / graphics packages (optional, see [`docs/installation/optional/media_graphics_packages.md`](docs/installation/optional/media_graphics_packages.md))
+
+```shell
+# pkg install imagemagick ffmpeg p5-Image-ExifTool
+```
+
+## Configuring Pleroma
+
+Create a user for Pleroma:
+
+```
+# pw add user pleroma -m
+# echo 'export LC_ALL="en_US.UTF-8"' >> /home/pleroma/.profile
+# su -l pleroma
+```
+
+Clone the repository:
+
+```
+$ cd $HOME # Should be the same as /home/pleroma
+$ git clone -b stable https://git.pleroma.social/pleroma/pleroma.git
+```
+
+Configure Pleroma. Note that you need a domain name at this point:
+
+```
+$ cd /home/pleroma/pleroma
+$ mix deps.get # Enter "y" when asked to install Hex
+$ mix pleroma.instance gen # You will be asked a few questions here.
+$ cp config/generated_config.exs config/prod.secret.exs
+```
+
+Since Postgres is configured, we can now initialize the database. There should
+now be a file in `config/setup_db.psql` that makes this easier. Edit it, and
+*change the password* to a password of your choice. Make sure it is secure, since
+it'll be protecting your database. As root, you can now initialize the database:
+
+```
+# cd /home/pleroma/pleroma
+# sudo -Hu postgres -g postgres psql -f config/setup_db.psql
+```
+
+Postgres allows connections from all users without a password by default. To
+fix this, edit `/var/db/postgres/data12/pg_hba.conf`. Change every `trust` to
+`password`.
+
+Once this is done, restart Postgres with:
+```
+# service postgresql restart
+```
+
+Run the database migrations.
+
+Back as the pleroma user, run the following to implement any database migrations.
+
+```
+# su -l pleroma
+$ cd /home/pleroma/pleroma
+$ MIX_ENV=prod mix ecto.migrate
+```
+
+You will need to do this whenever you update with `git pull`:
+
+## Configuring acme.sh
+
+We'll be using acme.sh in Stateless Mode for TLS certificate renewal.
+
+First, as root, allow the user `acme` to have access to the acme log file, as follows:
+
+```
+# touch /var/log/acme.sh.log
+# chown acme:acme /var/log/acme.sh.log
+# chmod 600 /var/log/acme.sh.log
+```
+
+Next, obtain your account fingerprint:
+
+```
+# sudo -Hu acme -g acme acme.sh --register-account
+```
+
+You need to add the following to your nginx configuration for the server
+running on port 80:
+
+```
+  location ~ ^/\.well-known/acme-challenge/([-_a-zA-Z0-9]+)$ {
+    default_type text/plain;
+    return 200 "$1.6fXAG9VyG0IahirPEU2ZerUtItW2DHzDzD9wZaEKpqd";
+  }
+```
+
+Replace the string after after `$1.` with your fingerprint.
+
+Start nginx:
+
+```
+# service nginx start
+```
+
+It should now be possible to issue a cert (replace `example.com`
+with your domain name):
+
+```
+# sudo -Hu acme -g acme acme.sh --issue -d example.com --stateless
+```
+
+Let's add auto-renewal to `/etc/crontab`
+(replace `example.com` with your domain):
+
+```
+/usr/local/bin/sudo -Hu acme -g acme /usr/local/sbin/acme.sh -r -d example.com --stateless
+```
+
+### Configuring nginx
+
+FreeBSD's default nginx configuration does not contain an include directive, which is
+typically used for multiple sites. Therefore, you will need to first create the required
+directory as follows:
+
+
+```
+# mkdir -p /usr/local/etc/nginx/sites-available
+```
+
+Next, add an `include` directive to `/usr/local/etc/nginx/nginx.conf`, within the `http {}`
+block, as follows:
+
+
+```
+http {
+...
+	include /usr/local/etc/nginx/sites-available/*;
+}
+```
+
+As root, copy `/home/pleroma/pleroma/installation/pleroma.nginx` to
+`/usr/local/etc/nginx/sites-available/pleroma.nginx`.
+
+Edit the defaults of `/usr/local/etc/nginx/sites-available/pleroma.nginx`:
+
+* Change `ssl_trusted_certificate` to `/var/db/acme/certs/example.tld/example.tld.cer`.
+* Change `ssl_certificate` to `/var/db/acme/certs/example.tld/fullchain.cer`.
+* Change `ssl_certificate_key` to `/var/db/acme/certs/example.tld/example.tld.key`.
+* Change all references of `example.tld` to your instance's domain name.
+
+## Creating a startup script for Pleroma
+
+Pleroma will need to compile when it initially starts, which typically takes a longer
+period of time. Therefore, it is good practice to initially run pleroma from the
+command-line before utilizing the rc.d script. That is done as follows:
+
+```
+# su -l pleroma
+$ cd $HOME/pleroma
+$ MIX_ENV=prod mix phx.server
+```
+
+Copy the startup script to the correct location and make sure it's executable:
+
+```
+# cp /home/pleroma/pleroma/installation/freebsd/rc.d/pleroma /usr/local/etc/rc.d/pleroma
+# chmod +x /usr/local/etc/rc.d/pleroma
+```
+
+Update the `/etc/rc.conf` and start pleroma with the following commands:
+
+```
+# sysrc pleroma_enable=YES
+# service pleroma start
+```
+
+#### Create your first user
+
+If your instance is up and running, you can create your first user with administrative rights with the following task:
+
+```shell
+sudo -Hu pleroma MIX_ENV=prod mix pleroma.user new <username> <your@emailaddress> --admin
+```
+## Conclusion
+
+Restart nginx with `# service nginx restart` and you should be up and running.
+
+Make sure your time is in sync, or other instances will receive your posts with
+incorrect timestamps. You should have ntpd running.
+
+## Questions
+
+Questions about the installation or didn’t it work as it should be, ask in [#pleroma:matrix.org](https://matrix.heldscal.la/#/room/#freenode_#pleroma:matrix.org) or IRC Channel **#pleroma** on **Freenode**.
diff --git a/docs/installation/gentoo_en.md b/docs/installation/gentoo_en.md
index 32152aea7..638fc4e47 100644
--- a/docs/installation/gentoo_en.md
+++ b/docs/installation/gentoo_en.md
@@ -28,12 +28,16 @@ Gentoo quite pointedly does not come with a cron daemon installed, and as such i
 * `dev-db/postgresql`
 * `dev-lang/elixir`
 * `dev-vcs/git`
+* `dev-util/cmake`
 
 #### Optional ebuilds used in this guide
 
 * `www-servers/nginx` (preferred, example configs for other reverse proxies can be found in the repo)
 * `app-crypt/certbot` (or any other ACME client for Let’s Encrypt certificates)
 * `app-crypt/certbot-nginx` (nginx certbot plugin that allows use of the all-powerful `--nginx` flag on certbot)
+* `media-gfx/imagemagick`
+* `media-video/ffmpeg`
+* `media-libs/exiftool`
 
 ### Prepare the system
 
@@ -46,7 +50,7 @@ Gentoo quite pointedly does not come with a cron daemon installed, and as such i
 * Emerge all required the required and suggested software in one go:
 
 ```shell
- # emerge --ask dev-db/postgresql dev-lang/elixir dev-vcs/git www-servers/nginx app-crypt/certbot app-crypt/certbot-nginx
+ # emerge --ask dev-db/postgresql dev-lang/elixir dev-vcs/git www-servers/nginx app-crypt/certbot app-crypt/certbot-nginx dev-util/cmake
 ```
 
 If you would not like to install the optional packages, remove them from this line. 
@@ -86,6 +90,12 @@ If you do not plan to make any modifications to your Pleroma instance, cloning d
 
 Not only does this make it much easier to deploy changes you make, as you can commit and pull from upstream and all that good stuff from the comfort of your local machine then simply `git pull` on your instance server when you're ready to deploy, it also ensures you are compliant with the Affero General Public Licence that Pleroma is licenced under, which stipulates that all network services provided with modified AGPL code must publish their changes on a publicly available internet service and for free. It also makes it much easier to ask for help from and provide help to your fellow Pleroma admins if your public repo always reflects what you are running because it is part of your deployment procedure.
 
+### Install media / graphics packages (optional, see [`docs/installation/optional/media_graphics_packages.md`](docs/installation/optional/media_graphics_packages.md))
+
+```shell
+# emerge --ask media-video/ffmpeg media-gfx/imagemagick media-libs/exiftool
+```
+
 ### Install PleromaBE
 
 * Add a new system user for the Pleroma service and set up default directories:
diff --git a/docs/installation/migrating_from_source_otp_en.md b/docs/installation/migrating_from_source_otp_en.md
index 31c2f1294..d303a6daf 100644
--- a/docs/installation/migrating_from_source_otp_en.md
+++ b/docs/installation/migrating_from_source_otp_en.md
@@ -8,13 +8,15 @@ You will be running commands as root. If you aren't root already, please elevate
 
 The system needs to have `curl` and `unzip` installed for downloading and unpacking release builds.
 
-```sh tab="Alpine"
-apk add curl unzip
-```
+=== "Alpine"
+    ```sh
+    apk add curl unzip
+    ```
 
-```sh tab="Debian/Ubuntu"
-apt install curl unzip
-```
+=== "Debian/Ubuntu"
+    ```sh
+    apt install curl unzip
+    ```
 
 ## Moving content out of the application directory
 When using OTP releases the application directory changes with every version so it would be a bother to keep content there (and also dangerous unless `--no-rm` option is used when updating). Fortunately almost all paths in Pleroma are configurable, so it is possible to move them out of there.
@@ -110,27 +112,29 @@ OTP releases have different service files than from-source installs so they need
 
 **Warning:** The service files assume pleroma user's home directory is `/opt/pleroma`, please make sure all paths fit your installation.
 
-```sh tab="Alpine"
-# Copy the service into a proper directory
-cp -f ~pleroma/installation/init.d/pleroma /etc/init.d/pleroma
+=== "Alpine"
+    ```sh
+    # Copy the service into a proper directory
+    cp -f ~pleroma/installation/init.d/pleroma /etc/init.d/pleroma
 
-# Start pleroma
-rc-service pleroma start
-```
+    # Start pleroma
+    rc-service pleroma start
+    ```
 
-```sh tab="Debian/Ubuntu"
-# Copy the service into a proper directory
-cp ~pleroma/installation/pleroma.service /etc/systemd/system/pleroma.service
+=== "Debian/Ubuntu"
+    ```sh
+    # Copy the service into a proper directory
+    cp ~pleroma/installation/pleroma.service /etc/systemd/system/pleroma.service
 
-# Reload service files
-systemctl daemon-reload
+    # Reload service files
+    systemctl daemon-reload
 
-# Reenable pleroma to start on boot
-systemctl reenable pleroma
+    # Reenable pleroma to start on boot
+    systemctl reenable pleroma
 
-# Start pleroma
-systemctl start pleroma
-```
+    # Start pleroma
+    systemctl start pleroma
+    ```
 
 ## Running mix tasks
 Refer to [Running mix tasks](otp_en.md#running-mix-tasks) section from OTP release installation guide.
diff --git a/docs/installation/netbsd_en.md b/docs/installation/netbsd_en.md
index 3626acc69..d5fa04fdf 100644
--- a/docs/installation/netbsd_en.md
+++ b/docs/installation/netbsd_en.md
@@ -10,7 +10,7 @@ Pleroma uses.
 
 The `mksh` shell is needed to run the Elixir `mix` script.
 
-`# pkgin install acmesh elixir git-base git-docs mksh nginx postgresql11-server postgresql11-client postgresql11-contrib sudo`
+`# pkgin install acmesh elixir git-base git-docs mksh nginx postgresql11-server postgresql11-client postgresql11-contrib sudo ffmpeg4 ImageMagick`
 
 You can also build these packages using pkgsrc:
 ```
@@ -19,6 +19,7 @@ databases/postgresql11-client
 databases/postgresql11-server
 devel/git-base
 devel/git-docs
+devel/cmake
 lang/elixir
 security/acmesh
 security/sudo
@@ -43,6 +44,10 @@ pgsql=YES
 
 First, run `# /etc/rc.d/pgsql start`. Then, `$ sudo -Hu pgsql -g pgsql createdb`.
 
+### Install media / graphics packages (optional, see [`docs/installation/optional/media_graphics_packages.md`](docs/installation/optional/media_graphics_packages.md))
+
+`# pkgin install ImageMagick ffmpeg4 p5-Image-ExifTool`
+
 ## Configuring Pleroma
 
 Create a user for Pleroma:
diff --git a/docs/installation/openbsd_en.md b/docs/installation/openbsd_en.md
index 5dbe24f75..8092ac379 100644
--- a/docs/installation/openbsd_en.md
+++ b/docs/installation/openbsd_en.md
@@ -10,19 +10,34 @@ The following packages need to be installed:
 
   * elixir
   * gmake
-  * ImageMagick
   * git
   * postgresql-server
   * postgresql-contrib
+  * cmake
+  * ffmpeg
+  * ImageMagick
 
 To install them, run the following command (with doas or as root):
 
 ```
-pkg_add elixir gmake ImageMagick git postgresql-server postgresql-contrib
+pkg_add elixir gmake git postgresql-server postgresql-contrib cmake ffmpeg ImageMagick
 ```
 
 Pleroma requires a reverse proxy, OpenBSD has relayd in base (and is used in this guide) and packages/ports are available for nginx (www/nginx) and apache (www/apache-httpd). Independently of the reverse proxy, [acme-client(1)](https://man.openbsd.org/acme-client) can be used to get a certificate from Let's Encrypt.
 
+#### Optional software
+
+Per [`docs/installation/optional/media_graphics_packages.md`](docs/installation/optional/media_graphics_packages.md):
+  * ImageMagick
+  * ffmpeg
+  * exiftool
+
+To install the above:
+
+```
+pkg_add ImageMagick ffmpeg p5-Image-ExifTool
+```
+
 #### Creating the pleroma user
 Pleroma will be run by a dedicated user, \_pleroma. Before creating it, insert the following lines in login.conf:
 ```
diff --git a/docs/installation/openbsd_fi.md b/docs/installation/openbsd_fi.md
index 272273cff..01cf34ab4 100644
--- a/docs/installation/openbsd_fi.md
+++ b/docs/installation/openbsd_fi.md
@@ -16,7 +16,18 @@ Matrix-kanava #freenode_#pleroma:matrix.org ovat hyviä paikkoja löytää apua
 
 Asenna tarvittava ohjelmisto:
 
-`# pkg_add git elixir gmake postgresql-server-10.3 postgresql-contrib-10.3`
+`# pkg_add git elixir gmake postgresql-server-10.3 postgresql-contrib-10.3 cmake ffmpeg ImageMagick`
+
+#### Optional software
+
+[`docs/installation/optional/media_graphics_packages.md`](docs/installation/optional/media_graphics_packages.md):
+  * ImageMagick
+  * ffmpeg
+  * exiftool
+
+Asenna tarvittava ohjelmisto:
+
+`# pkg_add ImageMagick ffmpeg p5-Image-ExifTool`
 
 Luo postgresql-tietokanta:
 
diff --git a/docs/installation/optional/media_graphics_packages.md b/docs/installation/optional/media_graphics_packages.md
new file mode 100644
index 000000000..cb3d71188
--- /dev/null
+++ b/docs/installation/optional/media_graphics_packages.md
@@ -0,0 +1,32 @@
+# Optional software packages needed for specific functionality
+
+For specific Pleroma functionality (which is disabled by default) some or all of the below packages are required:
+  * `ImageMagic`
+  * `ffmpeg`
+  * `exiftool`
+  
+Please refer to documentation in `docs/installation` on how to install them on specific OS.
+  
+Note: the packages are not required with the current default settings of Pleroma.
+
+## `ImageMagick`
+
+`ImageMagick` is a set of tools to create, edit, compose, or convert bitmap images.
+
+It is required for the following Pleroma features:
+  * `Pleroma.Upload.Filters.Mogrify`, `Pleroma.Upload.Filters.Mogrifun` upload filters (related config: `Plaroma.Upload/filters` in `config/config.exs`)
+  * Media preview proxy for still images (related config: `media_preview_proxy/enabled` in `config/config.exs`)
+  
+## `ffmpeg`
+
+`ffmpeg` is software to record, convert and stream audio and video.
+
+It is required for the following Pleroma features:
+  * Media preview proxy for videos (related config: `media_preview_proxy/enabled` in `config/config.exs`)
+
+## `exiftool`
+
+`exiftool` is media files metadata reader/writer.
+
+It is required for the following Pleroma features:
+  * `Pleroma.Upload.Filters.Exiftool` upload filter (related config: `Plaroma.Upload/filters` in `config/config.exs`)
diff --git a/docs/installation/otp_en.md b/docs/installation/otp_en.md
index 338dfa7d0..92584d80d 100644
--- a/docs/installation/otp_en.md
+++ b/docs/installation/otp_en.md
@@ -28,15 +28,36 @@ Other than things bundled in the OTP release Pleroma depends on:
 * nginx (could be swapped with another reverse proxy but this guide covers only it)
 * certbot (for Let's Encrypt certificates, could be swapped with another ACME client, but this guide covers only it)
 
-```sh tab="Alpine"
-echo "http://nl.alpinelinux.org/alpine/latest-stable/community" >> /etc/apk/repositories
-apk update
-apk add curl unzip ncurses postgresql postgresql-contrib nginx certbot
-```
-
-```sh tab="Debian/Ubuntu"
-apt install curl unzip libncurses5 postgresql postgresql-contrib nginx certbot
-```
+=== "Alpine"
+    ```
+    echo "http://nl.alpinelinux.org/alpine/latest-stable/community" >> /etc/apk/repositories
+    apk update
+    apk add curl unzip ncurses postgresql postgresql-contrib nginx certbot
+    ```
+
+=== "Debian/Ubuntu"
+    ```
+    apt install curl unzip libncurses5 postgresql postgresql-contrib nginx certbot
+    ```
+
+### Installing optional packages
+
+Per [`docs/installation/optional/media_graphics_packages.md`](docs/installation/optional/media_graphics_packages.md):
+  * ImageMagick
+  * ffmpeg
+  * exiftool
+
+=== "Alpine"
+    ```
+    echo "http://nl.alpinelinux.org/alpine/latest-stable/community" >> /etc/apk/repositories
+    apk update
+    apk add imagemagick ffmpeg exiftool
+    ```
+
+=== "Debian/Ubuntu"
+    ```
+    apt install imagemagick ffmpeg libimage-exiftool-perl
+    ```
 
 ## Setup
 ### Configuring PostgreSQL
@@ -47,35 +68,41 @@ apt install curl unzip libncurses5 postgresql postgresql-contrib nginx certbot
 
 RUM indexes are an alternative indexing scheme that is not included in PostgreSQL by default. You can read more about them on the [Configuration page](../configuration/cheatsheet.md#rum-indexing-for-full-text-search). They are completely optional and most of the time are not worth it, especially if you are running a single user instance (unless you absolutely need ordered search results).
 
-```sh tab="Alpine"
-apk add git build-base postgresql-dev
-git clone https://github.com/postgrespro/rum /tmp/rum
-cd /tmp/rum
-make USE_PGXS=1
-make USE_PGXS=1 install
-cd
-rm -r /tmp/rum
-```
-
-```sh tab="Debian/Ubuntu"
-# Available only on Buster/19.04
-apt install postgresql-11-rum
-```
+=== "Alpine"
+    ```
+    apk add git build-base postgresql-dev
+    git clone https://github.com/postgrespro/rum /tmp/rum
+    cd /tmp/rum
+    make USE_PGXS=1
+    make USE_PGXS=1 install
+    cd
+    rm -r /tmp/rum
+    ```
+
+=== "Debian/Ubuntu"
+    ```
+    # Available only on Buster/19.04
+    apt install postgresql-11-rum
+    ```
 
 #### (Optional) Performance configuration
 It is encouraged to check [Optimizing your PostgreSQL performance](../configuration/postgresql.md) document, for tips on PostgreSQL tuning.
 
-```sh tab="Alpine"
-rc-service postgresql restart
-```
+=== "Alpine"
+    ```
+    rc-service postgresql restart
+    ```
 
-```sh tab="Debian/Ubuntu"
-systemctl restart postgresql
-```
+=== "Debian/Ubuntu"
+    ```
+    systemctl restart postgresql
+    ```
 
 If you are using PostgreSQL 12 or higher, add this to your Ecto database configuration
 
 ```elixir
+#
+config :pleroma, Pleroma.Repo,
 prepare: :named,
 parameters: [
   plan_cache_mode: "force_custom_plan"
@@ -121,9 +148,6 @@ chown -R pleroma /etc/pleroma
 # Run the config generator
 su pleroma -s $SHELL -lc "./bin/pleroma_ctl instance gen --output /etc/pleroma/config.exs --output-psql /tmp/setup_db.psql"
 
-# Run the environment file generator.
-su pleroma -s $SHELL -lc "./bin/pleroma_ctl release_env gen"
-
 # Create the postgres database
 su postgres -s $SHELL -lc "psql -f /tmp/setup_db.psql"
 
@@ -134,7 +158,7 @@ su pleroma -s $SHELL -lc "./bin/pleroma_ctl migrate"
 # su pleroma -s $SHELL -lc "./bin/pleroma_ctl migrate --migrations-path priv/repo/optional_migrations/rum_indexing/"
 
 # Start the instance to verify that everything is working as expected
-su pleroma -s $SHELL -lc "export $(cat /opt/pleroma/config/pleroma.env); ./bin/pleroma daemon"
+su pleroma -s $SHELL -lc "./bin/pleroma daemon"
 
 # Wait for about 20 seconds and query the instance endpoint, if it shows your uri, name and email correctly, you are configured correctly
 sleep 20 && curl http://localhost:4000/api/v1/instance
@@ -154,14 +178,16 @@ certbot certonly --standalone --preferred-challenges http -d yourinstance.tld
 
 The location of nginx configs is dependent on the distro
 
-```sh tab="Alpine"
-cp /opt/pleroma/installation/pleroma.nginx /etc/nginx/conf.d/pleroma.conf
-```
+=== "Alpine"
+    ```
+    cp /opt/pleroma/installation/pleroma.nginx /etc/nginx/conf.d/pleroma.conf
+    ```
 
-```sh tab="Debian/Ubuntu"
-cp /opt/pleroma/installation/pleroma.nginx /etc/nginx/sites-available/pleroma.conf
-ln -s /etc/nginx/sites-available/pleroma.conf /etc/nginx/sites-enabled/pleroma.conf
-```
+=== "Debian/Ubuntu"
+    ```
+    cp /opt/pleroma/installation/pleroma.nginx /etc/nginx/sites-available/pleroma.conf
+    ln -s /etc/nginx/sites-available/pleroma.conf /etc/nginx/sites-enabled/pleroma.conf
+    ```
 
 If your distro does not have either of those you can append `include /etc/nginx/pleroma.conf` to the end of the http section in /etc/nginx/nginx.conf and
 ```sh
@@ -178,36 +204,39 @@ nginx -t
 ```
 #### Start nginx
 
-```sh tab="Alpine"
-rc-service nginx start
-```
+=== "Alpine"
+    ```
+    rc-service nginx start
+    ```
 
-```sh tab="Debian/Ubuntu"
-systemctl start nginx
-```
+=== "Debian/Ubuntu"
+    ```
+    systemctl start nginx
+    ```
 
 At this point if you open your (sub)domain in a browser you should see a 502 error, that's because Pleroma is not started yet.
 
 ### Setting up a system service
 
-```sh tab="Alpine"
-# Copy the service into a proper directory
-cp /opt/pleroma/installation/init.d/pleroma /etc/init.d/pleroma
+=== "Alpine"
+    ```
+    # Copy the service into a proper directory
+    cp /opt/pleroma/installation/init.d/pleroma /etc/init.d/pleroma
 
-# Start pleroma and enable it on boot
-rc-service pleroma start
-rc-update add pleroma
-```
+    # Start pleroma and enable it on boot
+    rc-service pleroma start
+    rc-update add pleroma
+    ```
 
-```sh tab="Debian/Ubuntu"
-# Copy the service into a proper directory
-cp /opt/pleroma/installation/pleroma.service /etc/systemd/system/pleroma.service
+=== "Debian/Ubuntu"
+    ```
+    # Copy the service into a proper directory
+    cp /opt/pleroma/installation/pleroma.service /etc/systemd/system/pleroma.service
 
-
-# Start pleroma and enable it on boot
-systemctl start pleroma
-systemctl enable pleroma
-```
+    # Start pleroma and enable it on boot
+    systemctl start pleroma
+    systemctl enable pleroma
+    ```
 
 If everything worked, you should see Pleroma-FE when visiting your domain. If that didn't happen, try reviewing the installation steps, starting Pleroma in the foreground and seeing if there are any errrors.
 
@@ -227,43 +256,45 @@ $EDITOR path-to-nginx-config
 nginx -t
 ```
 
-```sh tab="Alpine"
-# Restart nginx
-rc-service nginx restart
+=== "Alpine"
+    ```
+    # Restart nginx
+    rc-service nginx restart
 
-# Start the cron daemon and make it start on boot
-rc-service crond start
-rc-update add crond
+    # Start the cron daemon and make it start on boot
+    rc-service crond start
+    rc-update add crond
 
-# Ensure the webroot menthod and post hook is working
-certbot renew --cert-name yourinstance.tld --webroot -w /var/lib/letsencrypt/ --dry-run --post-hook 'rc-service nginx reload'
+    # Ensure the webroot menthod and post hook is working
+    certbot renew --cert-name yourinstance.tld --webroot -w /var/lib/letsencrypt/ --dry-run --post-hook 'rc-service nginx reload'
 
-# Add it to the daily cron
-echo '#!/bin/sh
-certbot renew --cert-name yourinstance.tld --webroot -w /var/lib/letsencrypt/ --post-hook "rc-service nginx reload"
-' > /etc/periodic/daily/renew-pleroma-cert
-chmod +x /etc/periodic/daily/renew-pleroma-cert
+    # Add it to the daily cron
+    echo '#!/bin/sh
+    certbot renew --cert-name yourinstance.tld --webroot -w /var/lib/letsencrypt/ --post-hook "rc-service nginx reload"
+    ' > /etc/periodic/daily/renew-pleroma-cert
+    chmod +x /etc/periodic/daily/renew-pleroma-cert
 
-# If everything worked the output should contain /etc/cron.daily/renew-pleroma-cert
-run-parts --test /etc/periodic/daily
-```
+    # If everything worked the output should contain /etc/cron.daily/renew-pleroma-cert
+    run-parts --test /etc/periodic/daily
+    ```
 
-```sh tab="Debian/Ubuntu"
-# Restart nginx
-systemctl restart nginx
+=== "Debian/Ubuntu"
+    ```
+    # Restart nginx
+    systemctl restart nginx
 
-# Ensure the webroot menthod and post hook is working
-certbot renew --cert-name yourinstance.tld --webroot -w /var/lib/letsencrypt/ --dry-run --post-hook 'systemctl reload nginx'
+    # Ensure the webroot menthod and post hook is working
+    certbot renew --cert-name yourinstance.tld --webroot -w /var/lib/letsencrypt/ --dry-run --post-hook 'systemctl reload nginx'
 
-# Add it to the daily cron
-echo '#!/bin/sh
-certbot renew --cert-name yourinstance.tld --webroot -w /var/lib/letsencrypt/ --post-hook "systemctl reload nginx"
-' > /etc/cron.daily/renew-pleroma-cert
-chmod +x /etc/cron.daily/renew-pleroma-cert
+    # Add it to the daily cron
+    echo '#!/bin/sh
+    certbot renew --cert-name yourinstance.tld --webroot -w /var/lib/letsencrypt/ --post-hook "systemctl reload nginx"
+    ' > /etc/cron.daily/renew-pleroma-cert
+    chmod +x /etc/cron.daily/renew-pleroma-cert
 
-# If everything worked the output should contain /etc/cron.daily/renew-pleroma-cert
-run-parts --test /etc/cron.daily
-```
+    # If everything worked the output should contain /etc/cron.daily/renew-pleroma-cert
+    run-parts --test /etc/cron.daily
+    ```
 
 ## Create your first user and set as admin
 ```sh
@@ -279,3 +310,4 @@ This will create an account withe the username of 'joeuser' with the email addre
 ## Questions
 
 Questions about the installation or didn’t it work as it should be, ask in [#pleroma:matrix.org](https://matrix.heldscal.la/#/room/#freenode_#pleroma:matrix.org) or IRC Channel **#pleroma** on **Freenode**.
+